6
iii GROUP ADDRESS in Decimal Format (ie. identity group address, identity trigger
group, identity variable number). 000-255
aaa VALUE or Action Selector depending on the setting of A.
Seconds or minutes (000-255) or percent (000-100) where relevant.
* Applications marked with an asterix* do not require a value.
DIGITS DESCRIPTION
xxx PROGRAMMING OPTION P151E TO P166E (Output Events 1 to 16).
ee 5400/16CBx EVENT.
01-16 Zone 1-16 unsealed, irrespective of panel armed or disarmed.
41-56 Zone 1-16 unsealed & panel Armed AREA 1 or AREA 2.
71-86 Zone 1-16 unsealed & panel FULLY Disarmed.
96 End of exit delay.
97 Alarm.
98 Panel Disarmed.
99 Panel Armed.
A APPLICATION IDENTITY.
1 Lighting Application.
2 Trigger Control Application.
3 Enable Control Application.
ff FUNCTION (For more information, see the relevant application document from Clipsal)
A=1
(LIGHTING APPLICATION)
A=2
(TRIGGER
CONTROL)
A=3
(ENABLE CONTROL)
00 OFF* TRIGGER MIN* N/A
15 ON* TRIGGER MAX* N/A
16 Pulse ON for aaa seconds N/A N/A
17 Pulse OFF for aaa seconds N/A N/A
18 Pulse ON for aaa minutes N/A N/A
19 Pulse OFF for aaa minutes N/A N/A
20 Ramp instantaneous to aaa % Triggers action aaa
Sets network variable aaa
21 4 sec ramps light to aaa% N/A N/A
22 8 sec ramps light to aaa% N/A N/A
23 12 sec ramps light to aaa% N/A N/A
24 20 sec ramps light to aaa% N/A N/A
25 30 sec ramps light to aaa% N/A N/A
26 40 sec ramps light to aaa% N/A N/A
27 1 min ramps light to aaa% N/A N/A
28 1.5 min ramps light to aaa% N/A N/A
29 2 min ramps light to aaa% N/A N/A
30 3 min ramps light to aaa% N/A N/A
31 5 min ramps light to aaa% N/A N/A
32 7 min ramps light to aaa% N/A N/A
33 10 min ramps light to aaa% N/A N/A
34 15 min ramps light to aaa% N/A N/A
35 17 min ramps light to aaa% N/A N/A
PROGRAMMING VARIABLES
DESCRIPTION
PxxxE The 5400/16CB option
number of the 16 available
Output Events.
(P151E to P166E).
ee The 5400/16CB EVENT
which will trigger a C-Bus
event.
A The APPLICATION
IDENTITY of the device
being controlled.
(i.e, Lighting Control, Trigger
Control or Enable Control).
ff FUNCTION (i.e, what the
C-Bus devices will do).
iii The C-Bus GROUP
ADDRESS number for the
devices being controlled.
aaa VALUE. (Such as seconds,
minutes or percent where
relevant).
P151E – P166E
C-BUS OUTPUT EVENTS
PROGRAM MODE LEVEL
Installer, Remote by PC.
FACTORY DEFAULT
No events
NOTES
Allowed digits are 0 to 9.
The number of digits is either 8 or 11
depending on whether the value [aaa]
is used - relevant to a particular control
message.
The 5400/16CB can be programmed to send up to 16 C-Bus control messages when different
5400/16CB events occur.
These program options set the
5400/16CB event to the required C-Bus function output.
PROGRAMMING SEQUENCE: PxxxE eeAffi ii[aaa] E
(27 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern