Clipsal 5400 Series Betriebsanweisung PDF herunterladen (Seite 20)

Clipsal 5400 HomeSafe Security Panel - USER Guide

* The Primary and Secondary telephone numbers are normally only

used for central station monitoring. These numbers can only be

programmed in Installer Program Mode.

** The Follow Me Telephone Number replaces the Primary AND

Secondary telephone numbers.

AUDIBLE MONITORING

The 5400 HomeSafe Security Panel can also

be programmed to send audible messages to

any telephone or mobile phone.

When programmed for audible monitoring, the

panel calls a pre-programmed number (or

numbers) and sounds a series of beeps over

the phone. These beeps can identify the zone

or zones which caused the alarm and well as

several other alarm types.

FOLLOW ME TELEPHONE NUMBER

The Follow Me Telephone Number is the

telephone number to which the 5400 sends

alarm reports when Audible Monitoring is

enabled.

The Follow Me Telephone Number can be

changed by the user in User Program Mode.

If the Follow Me Telephone Number is

programmed, the Primary and Secondary

telephone numbers are ignored, even if

programmed. (When Audible Monitoring is

enabled).

See page 19 for information on programming

the Follow Me Telephone Number.

AUDIBLE MONITORING SEQUENCE

When triggered by an alarm, the 5400 will dial

the programmed telephone number/s and

output the audible message for 45 seconds or

until it is acknowledged.

ACKNOWLEDGING THE ALARM

The person receiving the call can then

acknowledge the alarm by pressing the key

on their telephone. Press the key for at least

2 seconds during pauses in the audible

message.

If the alarm is not acknowledged, the keypad’s

LINE light will flash continuously until the panel

is next Armed.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27

Kommentare zu diesen Handbüchern

Keine Kommentare

Clipsal 5400 Series Betriebsanweisung Seite 20

Kommentare zu diesen Handbüchern