Clipsal C-Bus Bedienungsanleitung Seite 14

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 15
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 13
©2008 Schneider Electric. All Rights Reserved.
STEP 2: Add up the current provided to the network by C-Bus network Power
Supplies (stand-alone and on-board) and verify that the amount is less than 2 A.
Unit Type No.
Units
Current
Sourced
Total Current Sourced
DIN Relay with on-board
Power Supply
2 200 mA 400 mA
Stand-alone Power Supply 1 350 mA 350 mA
Total Sourced 750 mA (less than 2 A)
STEP 3: Subtract the current required (Step 1) from the current provided (Step 2) to
determine if the power will be sufficient for network operations.
750 mA (sourced) – 660 mA (needed) = 44 mA (extra)
CONCLUSIONS: The current drawn and sourced are under 2 A, and there is more
sourced than drawn, so no extra Power Supplies are needed.
PIR SENSOR ADJUSTMENT
Let the sensor stabilize for at least two minutes before adjusting it.
Use the sensor-adjustment screw. It has a 270° range-of-motion, with stops at about
7 o’clock and 5 o’clock. At 7 o’clock the light-level threshold is 150 footcandles; at 5
o’clock the light-level threshold is 0 footcandles.
Setting Action Adjustment
Screw
Load turns on day and night Turn screw counter-clockwise
until notch points to 7
Load off when ambient light
is sufficient
Turn screw clockwise until notch
points to 11
Load turns on at dusk Turn screw clockwise until notch
points to 1
Load turns on at night Turn screw clockwise until notch
points to 3
DISCLAIMER
Electrical equipment should be installed, operated, serviced, and maintained only
by qualified electrical maintenance personnel. Training provided by the Square D
Company, in-person or in a manual, should not be viewed as sufficient instruction
for those who are not otherwise qualified to install, operate, service, or maintain the
equipment under consideration. Although reasonable care has been taken to provide
accurate and authoritative information in presentations and documentation, no
responsibility is assumed by Square D Company, its employees, or its agents, for any
consequences arising out of the use of this material.
Seitenansicht 13
1 2 ... 9 10 11 12 13 14 15

Kommentare zu diesen Handbüchern

Keine Kommentare