Clipsal 56011 Spezifikationen PDF herunterladen (Seite 20)

M1 Door Access Module

A single door access interface module for use with M1 Controls. It installs in place of an M1 Keypad and

operates from the RS-485 4-Wire Keypad Data Bus.

• Input for a standard 26 bit Wiegand Reader

• Input for a Dallas iButton Reader

• (3)12VDC Outputs for Door Held Open

Alarm(50mA), Ready To Arm, and System Armed

indications (10mA)

• (2)Supervised Inputs for RTE (Request To Exit)

Button/Device and Door Status Sensor

• Four selectable Time settings for

"Request to Exit" and "Door Held Open"

• Heavy Duty Form “C” Relay Contacts for

Switching Door Strike Power

• Connections: Plug-In Screw Terminals,

16 Position

• Operating Voltage: 13.8VDC

• Current Draw: Less than 30 mA with minimum

activity, 44 mA fully active

• Housing Dimensions: 4.25" x 6.375" x 2.125"

• Circuit Board Dimensions: 3.95" x 2.875" x .95"

• Hardware Watchdog Circuit

ELK-M1KAM

62158 55052

Keypad Plug-in Proximity Reader

Plugs into the connector inside the ELK-M1KP keypad.

Allows a proximity

card or fob to be used to quickly arm, disarm, operate a door strike, etc.

• Reader format: 26 bit Wiegand

• Read Distance: ~3/8"

• 5 pin plug-in connector

• Operating voltage: 5VDC from keypad

• Current Draw: ~20mA

*Will not t other keypads- see ELK-106055

7 62158 55005

Requires M1PRC cards or M1PRF fobs

ELK-M1PR

M1 Proximity

“Clam Shell” Cards

For use with the add-on proximity

readers: ELK-M1PR for the

ELK-M1KP keypad or ELK-106055

exterior reader.

• Comes in packs of (10) ten

• Credit Card Size

• Color: Off white

• Size: 3.375” x 2.125” x .0625”

7 62158 55006 5

ELK-M1PRC

M1 Proximity Key Fobs

For use with the add-on proximity

readers: ELK-M1PR for the

ELK-M1KP keypad or ELK-106055

exterior reader.

• Comes in packs of (10) ten

• Attaches to key chain

• Color: Black

• Size: 2.125” x 1.3125” x .25”

7 62158 55007 2

ELK-M1PRF

Exterior Proximity Reader

Allows a proximity card or fob to be used with M1 Controls to quickly arm, disarm,

operate a door strike, etc.

• Weatherproof - suitable for

outdoor installation

• Size: 3 1/8” H x 1 7/8”W x 1”D

• Color: Black

• Operating Voltage: 12VDC

• Current draw: 50mA

• Connects to any M1KP Keypad

with ELK-W035A - use ELK-W039A

for M1KP2 & M1KP3 Keypads

• Can be used on any system that is

26 bit Wiegand compatible

ELK-106055

7 62158 55044

Requires M1PRC cards or M1PRF fobs

ELK-MA101

7 62158 50101 2

iButton™ Touchkeys

• 10 pieces

• Required with ELK-MA110

• Electronic key with unique 48-bit

serial number

• For access control, on/off switching,

password authentication, etc.

ELK-MA110

7 62158 50110 4

• For high security access control,

simple on/off switching, password

authentication, etc.

iButton™ Reader Probe & Plate Only

• Compatible with ELK-M1KAM

• Use ELK-MA101 iButton™ Touchkeys

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Clipsal 56011 Spezifikationen Seite 20

Kommentare zu diesen Handbüchern