Clipsal C-Bus Spezifikationen PDF herunterladen (Seite 30)

C-BUS TRAINING MANUAL - VOL 1

10.3 Area Address

The Area Address is used to simultaneously control all channels on a C-Bus relay or dimmer unit.

Figure 18 illustrates how Area Addresses are used.

Figure 18 – Area Addresses

Individual relay and dimmer channels can also be controlled from their local toggle buttons (unless

disabled by software).

11.0 Programming Technique

All C-Bus units leave the factory with a default undeﬁned Unit Address value of 255. You need to

assign a unique Unit Address to each unit before connecting it to a C-Bus system.

You do this by programming each unit prior to delivery, using a computer, a 5500PC interface and a

5500PS power supply:

1. ensure the 5500PC has a Unit Address of 000 before connecting the new C-Bus unit

2. connect the C-Bus unit to be programmed

3. assign the Unit Address, as a minimum programming requirement

4. disconnect the unit and mark it with its Unit Address

5. deliver the unit to site and install it on the network.

240Va.c.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 63 64

Keine Kommentare

Clipsal C-Bus Spezifikationen Seite 30