Clipsal C-Bus Spezifikationen PDF herunterladen (Seite 56)

C-BUS TRAINING MANUAL - VOL 1

3.6 Analogue Output Unit

The DIN rail mounted Analogue Output Unit provides analogue voltage control signals. These can be

used to drive most types of 0 to 10V electronic dimmable ballasts used in the lighting industry.

The 0 to 10V signal may be used to control other equipment with this standard control input voltage.

The signal direction ranges from 0 to 10V, as the C-Bus ramping level increases from 0% to 100%.

The Analogue Output Unit operates in response to commands from C-Bus input units. The output

terminals can be assigned to any combination of group addresses, providing multiple output control.

Four analogue outputs are provided for independent control of up to four devices, with a common

reference connection.

This unit requires power from a mains a.c supply with Earth.

3.7 Infrared Transmitter

The Infrared Transmitter unit is a C-Bus output unit that controls third party

devices using infrared signals. The unit is typically used to control audiovisual

equipment such as TVs, DVDs and VCRs. Other infrared capable devices

such as motorised blinds and air conditioning units can also be controlled.

A specialised software tool, the C-Bus Infrared Commissioning Application

(CIRCA), is provided for programming the unit. The CIRCA software allows

the user to select infrared codes, and assign C-Bus events to trigger their

transmission. The same conﬁ guration can be uploaded to multiple units

without having to be reprogrammed.

A high speed programming cable is required to program this unit.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Keine Kommentare

Clipsal C-Bus Spezifikationen Seite 56