Clipsal C-Bus Spezifikationen PDF herunterladen (Seite 57)

1C. C-Bus Hardware

4.0 C-Bus Indicators

All C-Bus Output Units (apart from the Infrared Transmitter) have three types of indicators that serve a

common purpose. Figure 5 and Table 2 show the location of the indicators on a C-Bus output unit,

together with their explanation.

For the speciﬁc functions of various indicators, please see the relevant installation instructions that

come with the C-Bus units.

Figure 5 – C-Bus output unit indicators

Unit LED This LED indicates the status of the individual unit, and whether mains

power is present. If the Unit LED is ﬂashing with a 90% on duty cycle,

it indicates that a local or remote override has been toggled.

C-Bus LED This indicator shows the status of the C-Bus network at that particular

unit. If the indicator is off, either no C-Bus clock or voltage is detected.

Local Toggle The Local Toggle Indicators show the status of each channel on the

Indicators particular output unit. Each Toggle Indicator is also a switch, which

allows each individual channel to be manually controlled. These

indicators are also used in Learn Mode.

Table 2 – Explanation of C-Bus output unit indicators

The Unit and C-Bus indicators are found on most system support devices and some input units.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 63 64

Keine Kommentare

Clipsal C-Bus Spezifikationen Seite 57