Clipsal C-Bus Bedienerhandbuch PDF herunterladen (Seite 104)

C-Bus™ Basic Programming 1250SM0904R10/09

C-Bus™ Products Training Course 10/2009

Figure 78 - The Recovery tab of a relay

Restrike Delay Tab

Many lighting devices such as high bay lamps (typically, metal halide or

Sodium Vapour lamps) require a minimal period to cool down before being

turned on again (restriking).

The Restrike Delay tab provides the means for setting a global restrike

delay interval on a channel by channel basis. If you have lamps that require

a cooling down period, then you can add a restrike delay by selecting the

relevant channels (using the check boxes), and setting the delay interval

using the restrike delay.

Figure 79 - The Restrike Delay tab of a relay

The image below shows the behaviour of a relay channel with a 10 minute

restrike delay programmed into it. You will see that all ON and OFF

commands that are sent during the delay period are ignored for that

particular channel. Once the 10 minute restrike delay is over, the relay will

change to the current state of the group address that its controlled by.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 147 148

Keine Kommentare

Clipsal C-Bus Bedienerhandbuch Seite 104