Clipsal C-Bus Bedienerhandbuch PDF herunterladen (Seite 50)

C-Bus™ Basic Programming 1250SM0904R10/09

C-Bus™ Products Training Course 10/2009

2) Turn on all local toggle buttons.

3) Select a C-Bus button to control the area address.

4) Exit Learn Mode.

Master switching controls should be configured last using Learn Mode.

Control of each individual is not affected for any unit that has master

switching implemented.

NOTE: Some temporary indicator state mismatches may occur when Units

are operated in this way; however these are normally resolved automatically

in seconds.

Timer Configurations

The C-Bus system offers many timer options and some of these are

available by means of Learn Mode. To create a timer on an input switch:

1) Set the network into Learn Mode.

2) Select a channel on a C-Bus output unit.

3) Press and hold a button on an input unit until the indicator flashes.

4) Exit Learn Mode.

The button indicator will come on after 1 second with a series of double

flashes. Each double flash represents a time period of 5 minutes. Exit Learn

Mode to assign the timer to the wall switch button. If Learn Mode is exited

immediately after the first double flash, a 5 second timer will be set to the

wall switch button. This can be useful for testing purposes.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 147 148

Keine Kommentare

Clipsal C-Bus Bedienerhandbuch Seite 50