Clipsal C-Bus Bedienerhandbuch PDF herunterladen (Seite 141)

1250SM0904R10/09 C-Bus™ Basic Programming

10/2009 C-Bus™ Products Training Course

Variants

A Variant is a feature of a DLT that allows us to use different Labels for the

same group address. Each button/key on a DLT allows us to use 4 variants

(of a DLT label) for each group address that is used.

Imagine you had a DLT, which was using the 3 button configuration to

control a C-Bus Shutter Relay. All three buttons use the same group

address, but have different key functions (Shutter Open, Shutter Close and

Shutter Stop).

Since a single group address is used across 3 buttons, it does not make

logical sense for all buttons to have the same label. What makes more

sense is to label each button with different label to explain its operation.

The image below shows three buttons on a DLT with the Bedroom 1 group

address, and the 3 button function for control of the C-Bus Shutter Relay.

You will see that:

 Button 1 uses Variant 1 that is labelled as Open

 Button 2 uses Variant 2 that is labelled as Close

 Button 3 uses Variant 3 that is labelled as Stop.

Figure 123 - A DLT using variants

To program a variant, select the variant number (1 to 4) you wish to use,

and press the Edit button (

) to change label for that variant. You will

notice that as you create more label variants for a group address, they will

show up in the Variant drop down box as shown below.

Figure 124 - The variant labels of a group address

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 147 148

Keine Kommentare

Clipsal C-Bus Bedienerhandbuch Seite 141